Implant-Grade Ti-6Al-4V ELI (ISO 5832-3 / ASTM F136) vs 316LVM Stainless Steel (ISO 5832-1) in Trauma Fixation
Metallurgical comparison of vacuum-melted 316LVM austenitic steel and Extra-Low Interstitial Titanium (Ti-6Al-4V ELI) across Young's modulus, MRI artifact reduction, and fatigue strength.
Reviewed against ASTM F136 / ISO 5832-3 Ti-6Al-4V ELI titanium and ISO 5832-1 316LVM implant metallurgy, locking thread geometry, and AO trauma standards.
On this page (2)
Implant metallurgy governs long-term biocompatibility, stress-shielding remodeling, and post-operative CT/MRI diagnostic clarity. OrthoValley manufactures complete trauma fixation lines in both vacuum-arc remelted 316LVM stainless steel (ISO 5832-1 / ASTM F138) and Extra-Low Interstitial Titanium alloy Ti-6Al-4V ELI (ISO 5832-3 / ASTM F136).
1. Mechanical & Physical Properties Comparison
| Metallurgical Property | 316LVM Stainless Steel (ISO 5832-1) | Ti-6Al-4V ELI Titanium (ISO 5832-3) | Cortical Human Bone |
|---|---|---|---|
| Young's Modulus (Elasticity) | ~193 GPa (High stiffness) | ~110 GPa (Closer to cortical bone) | 15 – 30 GPa |
| Ultimate Tensile Strength | 860 – 1,000 MPa (Cold-worked) | 860 – 965 MPa (Annealed ELI) | 130 – 150 MPa |
| MRI / CT Scatter Artifact | Moderate ferromagnetic distortion | Minimal artifact; MRI conditional safe | N/A |
| Nickel Hypersensitivity | Contains 13–15% Ni | 100% Nickel-Free (TiO2 passive layer) | N/A |
2. Color-Coded Type II Anodization & Oxide Layer Biocompatibility
Electrochemical Type II and Type III anodization not only color-codes fragment diameters (Blue for 2.0 mm, Gold for 2.4/2.7 mm, Magenta/Green for 3.5 mm, Grey/Gold for 4.5 mm) for instant scrub-nurse identification, but also thickens the inert TiO₂ barrier layer to inhibit metallic ion release.
Related Categories & Sourcing Hubs
Dr. Tariq Mahmood
Implant Grade Titanium & ISO 5832-3 Metallurgy Advisor
Reviewed against ASTM F136 / ISO 5832-3 Ti-6Al-4V ELI titanium and ISO 5832-1 316LVM implant metallurgy, locking thread geometry, and AO trauma standards.